SPECIAL PROJECT SECURITY SOLUTIONS
WPS
system
WPS™ is a self-supporting perimeter barrier made of sensitive wires spaced approximately 15 cm apart and mounted on posts placed at regular intervals.
This structure acts simultaneously as a physical barrier and as a sensor: any attempt to cut, spread, or climb the wires generates a mechanical stress that is immediately detected.
The system is modular and scalable, and can be installed on fences, existing walls, or as an independent barrier. It can cover very large perimeters thanks to the multiplex version.
WPS™ automatically distinguishes real intrusion events from environmental disturbances such as wind or precipitation, providing reliable and continuous perimeter protection even under challenging conditions.
The system is modular and scalable, and can be installed on fences, existing walls, or as an independent barrier. It can cover very large perimeters thanks to the multiplex version.
WPS™ automatically distinguishes real intrusion events from environmental disturbances such as wind or precipitation, providing reliable and continuous perimeter protection even under challenging conditions.
The WPS system offers an innovative solution for perimeter protection through the use of sensitive wires tensioned by a dedicated anchoring system.
These wires can detect unusual movements along the fence line, thus creating an effective physical barrier against unauthorized intrusions.
Thanks to its advanced technology, WPS ensures constant and timely monitoring, delivering a high level of security for your property.
Choosing the WPS system means investing in peace of mind and in the protection of your environment.
These wires can detect unusual movements along the fence line, thus creating an effective physical barrier against unauthorized intrusions.
Thanks to its advanced technology, WPS ensures constant and timely monitoring, delivering a high level of security for your property.
Choosing the WPS system means investing in peace of mind and in the protection of your environment.
It can be installed above or behind existing fences/walls, or used as a self-supporting barrier.
WPS is a modular system. It provides 300 m of wire per sensor, therefore each zone’s length depends on its height. Up to 25.6 km can be protected with a single MIND perimeter unit (assuming 6 sensitive-wire lines spaced 15 cm apart).
A correct installation requires a sensor every 50 meters.
The WPS system represents an innovative solution for perimeter protection, integrating a physical and sensitive barrier into a single highly efficient device.
Thanks to automatic sensitivity control, managed directly by the concentrator, the system ensures precise monitoring that adapts to different environmental conditions.
Furthermore, the technology used makes WPS immune to disturbances caused by animals, ensuring continuous and reliable surveillance.
Choosing WPS means investing in advanced, customizable protection for your security.
Thanks to automatic sensitivity control, managed directly by the concentrator, the system ensures precise monitoring that adapts to different environmental conditions.
Furthermore, the technology used makes WPS immune to disturbances caused by animals, ensuring continuous and reliable surveillance.
Choosing WPS means investing in advanced, customizable protection for your security.
WPS™ is a self-supporting system that forms a true perimeter barrier consisting of sensitive wires positioned 15 cm apart, supported by posts spaced approximately 2.5–3.0 m along the entire structure and anchored to two terminal posts.
The resulting barrier is sensitive to cutting attempts or climbing actions involving wire separation, detecting mechanical stresses generated during an intrusion attempt.
WPS™ is a modular system, suitable for protecting perimeters of any length or shape.
It can also be installed above or behind existing boundary walls.
The resulting barrier is sensitive to cutting attempts or climbing actions involving wire separation, detecting mechanical stresses generated during an intrusion attempt.
WPS™ is a modular system, suitable for protecting perimeters of any length or shape.
It can also be installed above or behind existing boundary walls.
WPS™ is available in a Stand-Alone version, offering up to 2,400 m of sensitive wire per system, and in a Multiplex version, capable of protecting up to 153 km of sensitive wire with a single MIND™ perimeter control unit.
The architecture supports up to 64 MIND™ units.
The architecture supports up to 64 MIND™ units.
WPS™ is based on the electrostriction phenomenon, making it sensitive at every point along its entire length.
Its active component is a cable with a steel core.
These characteristics make it highly responsive to any sabotage attempt.
When mechanical stress occurs, the cable generates an electrical signal due to the relative movement between its steel core and the dielectric material.
This signal, locally pre-amplified, is transmitted to a control unit capable of analyzing it intelligently and generating an alarm.
The microprocessor-based unit distinguishes signals caused by atmospheric events, such as wind, hail, rain, or thermal effects, from those generated by an actual intrusion.
Its active component is a cable with a steel core.
These characteristics make it highly responsive to any sabotage attempt.
When mechanical stress occurs, the cable generates an electrical signal due to the relative movement between its steel core and the dielectric material.
This signal, locally pre-amplified, is transmitted to a control unit capable of analyzing it intelligently and generating an alarm.
The microprocessor-based unit distinguishes signals caused by atmospheric events, such as wind, hail, rain, or thermal effects, from those generated by an actual intrusion.
- Modular system
- Maximum wire length per zone: 300 m
- True physical barrier
- Mechanical-stress detection
- Suitable for installation above or behind existing walls
- Immune to low temperatures
- Customizable sensitivity for each section
- Maximum wire length per zone: 300 m
- True physical barrier
- Mechanical-stress detection
- Suitable for installation above or behind existing walls
- Immune to low temperatures
- Customizable sensitivity for each section
MIND
Multiplex remote control unit.
TPS
Tensioned wires perimeter protection system.
CONTACT US
send a message
Do you have questions, requests, or are you interested in exploring a collaboration? Fill out the form below or contact us directly, we will get back to you as soon as possible to guide you toward the solution that best suits your needs.
